Tuesday in Love Halal UV Gel Polish

Halal UV Gel Polish

Color AL0404: Cool Taupe with Pink Undertone and Shimmer Finish

How to Apply:

• Nail Preparation: Start by washing your hands to eliminate oils or dirt. Trim nails if necessary and use a nail buffer to create an optimal surface. It is HIGHLY RECOMMENDED to use our Basecoat before applying a layer of color.
• Apply Thin Coats: Consistently apply thin, even layers of gel polish. Thick applications pose challenges in thorough curing, often resulting in under-curing, which can lead to lifting or peeling of the gel.
• Sequential Curing: Cure each layer individually—base coat, color coats, and top coat. Avoid hurrying the process; adhere to the recommended curing times.
• Verify Curing: Post-curing, the gel polish should be completely dry, firm, and glossy. If it feels tacky or sticky, it hasn't fully cured. In such instances, recure the nails for an additional 10-30 seconds, depending on the gel polish's specifics.

Permeable up to 4 coats in any combination of Basecoat, UV Gel polish, and Topcoat.

Our Halal UV Gel Polish is lab tested to ensure the highest quality of wudhu compliance and is certified by the Halal Certification Services of Canada (HCSC). Unlike regular nail polish that is nitrocellulose based, UV Gel polish is made from acrylic monomers and oligomers that react to UV light. Therefore, the permeability can not be tested with a simple at home water permeability test. Our Tuesday in Love Halal UV Gel Polish is lab tested using specialized WVTR Permeability Analyzers to ensure that all batches of our Halal UV Gel is wudhu friendly. For more information on our lab testing, please feel free to contact Direx Labs at support@direxlabs.com. You can also view our lab and halal certifications on our website at the following link: https://www.tuesdayinlove.com/pages/about-us-halal-certification

General Tips

Colors on the website may appear slightly different based on your screen resolution, skin tone, and lighting.

- Requires UV/LED Lamp for curing.

.

COMMON ERRORS AND THEIR SOLUTIONS

Skipping Base and Topcoats: Base and topcoats are integral for adhesion and protection. Skipping these layers invites chipping and peeling. Apply a base coat to prepare nails and a topcoat for sealing and protection.

Under-Curing: To prevent under-curing, adhere strictly to the recommended curing times provided by the gel polish manufacturer. When uncertain, slightly extend the curing duration.

Over-Curing: Excessive curing can render the gel brittle and prone to cracking. It's vital not to surpass the specified curing times. For lamps with higher wattage, reduce the curing duration slightly.

Incorrect Positioning: Misplaced nails can result in uneven curing. Ensure proper placement at the center of the lamp, allowing the UV light to reach all gel polish areas.

Thick Applications: Applying thick layers leads to uneven curing. Always opt for thin, uniform coats, curing each layer separately for optimal results.

CAUTIONS - Avoid skin and eye contact. Do not ingest. Keep out of reach of children. Exposure to gel and acrylate polishes may trigger skin reactions in some individuals. Discontinue use if sensitivity or irritation occurs. Seek immediate medical attention if a reaction occurs.